Surgical Drill Bits
During orthopedic surgery, surgical drill bits are used to create holes in the bone so that bone plates can be fixed with screws. It is possible to drill holes directly into bone without using a plate in order to place screws directly into the bone.
Surgical drills require fewer steps to simulate surgery, saving time by using a more reliable and accurate method. The availability of cutting-edge surgical drill bits allows for precise measurement from the outer skin layer to the end of the drill sleeve, which can be judged directly from the drill bit.
Our Drill Bits are made from high quality surgical stainless steel. These drill bits are rust proof, can used multiple times after sterilization.
Surgical Drill Bits are available in various types, lengths and diameters.
Types: Solid Plain Shank, Solid Quick Copuling, Cannulated Plain Shank, Cannulated Quick Copuling
Diameters: 1 mm, to 5 mm
Lengths: 60 mm to 250 mm
Surgical Drill Bits are used to make holes in the bone for fixation of bone plates with screws during orthopedic surgery. Sometimes holes are made in bone for placement of screws directly in bone without any plate.
Bone fracture treatment typically entails restoring the fractured parts to their original position and immobilising them until healing occurs. Drilling holes in bone with surgical drill bits is a common procedure used to fix fractured parts for immobilisation. During the surgical process, orthopaedic drilling causes an increase in bone temperature and forces, which can sometimes lead to osteonecrosis and reduce the stability and strength of the fixation.
Solid Plain Shank Surgical Drill Bits Sizes
Solid, Plain Shank (Dia x Length) : 1 mm x 60 mm
Solid, Plain Shank (Dia x Length) : 1.1 mm x 60 mm
Solid, Plain Shank (Dia x Length) : 1.2 mm x 60 mm
Solid, Plain Shank (Dia x Length) : 1.5 mm x 80 mm
Solid, Plain Shank (Dia x Length) : 2 mm x 100 mm
Solid, Plain Shank (Dia x Length) : 2.2 mm x 100 mm
Solid, Plain Shank (Dia x Length) : 2.4 mm x 100 mm
Solid, Plain Shank (Dia x Length) : 2.5 mm x 120 mm
Solid, Plain Shank (Dia x Length) : 2.7 mm x 100 mm
Solid, Plain Shank (Dia x Length) : 2.7 mm x 130 mm
Solid, Plain Shank (Dia x Length) : 2.7 mm x 150 mm
Solid, Plain Shank (Dia x Length) : 2.8 mm x 170 mm
Solid, Plain Shank (Dia x Length) : 3.2 mm x 130 mm
Solid, Plain Shank (Dia x Length) : 3.2 mm x 150 mm
Solid, Plain Shank (Dia x Length) : 3.2 mm x 200 mm
Solid, Plain Shank (Dia x Length) : 3.2 mm x 230 mm
Solid, Plain Shank (Dia x Length) : 3.2 mm x 250 mm
Solid, Plain Shank (Dia x Length) : 3.5 mm x 130 mm
Solid, Plain Shank (Dia x Length) : 3.5 mm x 150 mm
Solid, Plain Shank (Dia x Length) : 3.5 mm x 200 mm
Solid, Plain Shank (Dia x Length) : 3.5 mm x 230 mm
Solid, Plain Shank (Dia x Length) : 3.5 mm x 250 mm
Solid, Plain Shank (Dia x Length) : 4 mm x 200 mm
Solid, Plain Shank (Dia x Length) : 4 mm x 230 mm
Solid, Plain Shank (Dia x Length) : 4 mm x 250 mm
Solid, Plain Shank (Dia x Length) : 4.3 mm x 230 mm
Solid, Plain Shank (Dia x Length) : 4.5 mm x 130 mm
Solid, Plain Shank (Dia x Length) : 4.5 mm x 150 mm
Solid, Plain Shank (Dia x Length) : 4.5 mm x 200 mm
Solid, Plain Shank (Dia x Length) : 4.5 mm x 230 mm
Solid, Plain Shank (Dia x Length) : 5 mm x 200 mm
Solid, Plain Shank (Dia x Length) : 5 mm x 250 mm
Solid Quick Copuling Surgical Drill Bits Sizes
Solid, Quick Copuling (Dia x Length) : 1 mm x 60 mm
Solid, Quick Copuling (Dia x Length) : 1.1 mm x 60 mm
Solid, Quick Copuling (Dia x Length) : 1.2 mm x 60 mm
Solid, Quick Copuling (Dia x Length) : 1.5 mm x 80 mm
Solid, Quick Copuling (Dia x Length) : 2 mm x 100 mm
Solid, Quick Copuling (Dia x Length) : 2.2 mm x 100 mm
Solid, Quick Copuling (Dia x Length) : 2.4 mm x 100 mm
Solid, Quick Copuling (Dia x Length) : 2.5 mm x 120 mm
Solid, Quick Copuling (Dia x Length) : 2.7 mm x 100 mm
Solid, Quick Copuling (Dia x Length) : 2.7 mm x 130 mm
Solid, Quick Copuling (Dia x Length) : 2.7 mm x 150 mm
Solid, Quick Copuling (Dia x Length) : 2.8 mm x 170 mm
Solid, Quick Copuling (Dia x Length) : 3.2 mm x 130 mm
Solid, Quick Copuling (Dia x Length) : 3.2 mm x 150 mm
Solid, Quick Copuling (Dia x Length) : 3.2 mm x 200 mm
Solid, Quick Copuling (Dia x Length) : 3.2 mm x 230 mm
Solid, Quick Copuling (Dia x Length) : 3.2 mm x 250 mm
Solid, Quick Copuling (Dia x Length) : 3.5 mm x 130 mm
Solid, Quick Copuling (Dia x Length) : 3.5 mm x 150 mm
Solid, Quick Copuling (Dia x Length) : 3.5 mm x 200 mm
Solid, Quick Copuling (Dia x Length) : 3.5 mm x 230 mm
Solid, Quick Copuling (Dia x Length) : 3.5 mm x 250 mm
Solid, Quick Copuling (Dia x Length) : 4 mm x 200 mm
Solid, Quick Copuling (Dia x Length) : 4 mm x 230 mm
Solid, Quick Copuling (Dia x Length) : 4 mm x 250 mm
Solid, Quick Copuling (Dia x Length) : 4.3 mm x 230 mm
Solid, Quick Copuling (Dia x Length) : 4.5 mm x 130 mm
Solid, Quick Copuling (Dia x Length) : 4.5 mm x 150 mm
Solid, Quick Copuling (Dia x Length) : 4.5 mm x 200 mm
Solid, Quick Copuling (Dia x Length) : 4.5 mm x 230 mm
Solid, Quick Copuling (Dia x Length) : 5 mm x 200 mm
Solid, Quick Copuling (Dia x Length) : 5 mm x 250 mm
Cannulated Plain Shank Surgical Drill Bits Sizes
Cannulated, Plain Shank (Dia x Length) : 1 mm x 60 mm
Cannulated, Plain Shank (Dia x Length) : 1.1 mm x 60 mm
Cannulated, Plain Shank (Dia x Length) : 1.2 mm x 60 mm
Cannulated, Plain Shank (Dia x Length) : 1.5 mm x 80 mm
Cannulated, Plain Shank (Dia x Length) : 2 mm x 100 mm
Cannulated, Plain Shank (Dia x Length) : 2.2 mm x 100 mm
Cannulated, Plain Shank (Dia x Length) : 2.4 mm x 100 mm
Cannulated, Plain Shank (Dia x Length) : 2.5 mm x 120 mm
Cannulated, Plain Shank (Dia x Length) : 2.7 mm x 100 mm
Cannulated, Plain Shank (Dia x Length) : 2.7 mm x 130 mm
Cannulated, Plain Shank (Dia x Length) : 2.7 mm x 150 mm
Cannulated, Plain Shank (Dia x Length) : 2.8 mm x 170 mm
Cannulated, Plain Shank (Dia x Length) : 3.2 mm x 130 mm
Cannulated, Plain Shank (Dia x Length) : 3.2 mm x 150 mm
Cannulated, Plain Shank (Dia x Length) : 3.2 mm x 200 mm
Cannulated, Plain Shank (Dia x Length) : 3.2 mm x 230 mm
Cannulated, Plain Shank (Dia x Length) : 3.2 mm x 250 mm
Cannulated, Plain Shank (Dia x Length) : 3.5 mm x 130 mm
Cannulated, Plain Shank (Dia x Length) : 3.5 mm x 150 mm
Cannulated, Plain Shank (Dia x Length) : 3.5 mm x 200 mm
Cannulated, Plain Shank (Dia x Length) : 3.5 mm x 230 mm
Cannulated, Plain Shank (Dia x Length) : 3.5 mm x 250 mm
Cannulated, Plain Shank (Dia x Length) : 4 mm x 200 mm
Cannulated, Plain Shank (Dia x Length) : 4 mm x 230 mm
Cannulated, Plain Shank (Dia x Length) : 4 mm x 250 mm
Cannulated, Plain Shank (Dia x Length) : 4.3 mm x 230 mm
Cannulated, Plain Shank (Dia x Length) : 4.5 mm x 130 mm
Cannulated, Plain Shank (Dia x Length) : 4.5 mm x 150 mm
Cannulated, Plain Shank (Dia x Length) : 4.5 mm x 200 mm
Cannulated, Plain Shank (Dia x Length) : 4.5 mm x 230 mm
Cannulated, Plain Shank (Dia x Length) : 5 mm x 200 mm
Cannulated, Plain Shank (Dia x Length) : 5 mm x 250 mm
Cannulated Quick Copuling Surgical Drill Bits Sizes
Cannulated, Quick Copuling (Dia x Length) : 1 mm x 60 mm
Cannulated, Quick Copuling (Dia x Length) : 1.1 mm x 60 mm
Cannulated, Quick Copuling (Dia x Length) : 1.2 mm x 60 mm
Cannulated, Quick Copuling (Dia x Length) : 1.5 mm x 80 mm
Cannulated, Quick Copuling (Dia x Length) : 2 mm x 100 mm
Cannulated, Quick Copuling (Dia x Length) : 2.2 mm x 100 mm
Cannulated, Quick Copuling (Dia x Length) : 2.4 mm x 100 mm
Cannulated, Quick Copuling (Dia x Length) : 2.5 mm x 120 mm
Cannulated, Quick Copuling (Dia x Length) : 2.7 mm x 100 mm
Cannulated, Quick Copuling (Dia x Length) : 2.7 mm x 130 mm
Cannulated, Quick Copuling (Dia x Length) : 2.7 mm x 150 mm
Cannulated, Quick Copuling (Dia x Length) : 2.8 mm x 170 mm
Cannulated, Quick Copuling (Dia x Length) : 3.2 mm x 130 mm
Cannulated, Quick Copuling (Dia x Length) : 3.2 mm x 150 mm
Cannulated, Quick Copuling (Dia x Length) : 3.2 mm x 200 mm
Cannulated, Quick Copuling (Dia x Length) : 3.2 mm x 230 mm
Cannulated, Quick Copuling (Dia x Length) : 3.2 mm x 250 mm
Cannulated, Quick Copuling (Dia x Length) : 3.5 mm x 130 mm
Cannulated, Quick Copuling (Dia x Length) : 3.5 mm x 150 mm
Cannulated, Quick Copuling (Dia x Length) : 3.5 mm x 200 mm
Cannulated, Quick Copuling (Dia x Length) : 3.5 mm x 230 mm
Cannulated, Quick Copuling (Dia x Length) : 3.5 mm x 250 mm
Cannulated, Quick Copuling (Dia x Length) : 4 mm x 200 mm
Cannulated, Quick Copuling (Dia x Length) : 4 mm x 230 mm
Cannulated, Quick Copuling (Dia x Length) : 4 mm x 250 mm
Cannulated, Quick Copuling (Dia x Length) : 4.3 mm x 230 mm
Cannulated, Quick Copuling (Dia x Length) : 4.5 mm x 130 mm
Cannulated, Quick Copuling (Dia x Length) : 4.5 mm x 150 mm
Cannulated, Quick Copuling (Dia x Length) : 4.5 mm x 200 mm
Cannulated, Quick Copuling (Dia x Length) : 4.5 mm x 230 mm
Cannulated, Quick Copuling (Dia x Length) : 5 mm x 200 mm
Cannulated, Quick Copuling (Dia x Length) : 5 mm x 250 mm